BBT ANTENNAS exhibited at LEAP 2026 in Riyadh, Saudi Arabia (Booth H3.F186, August 31 to September 3). We manufacture 5G, WiFi, RFID, DAS, and IoT antennas with full OEM/ODM and custom design support. Whether you met us at the show or found us after, this page covers our antenna lines, how we work with OEM and ODM partners, and what our factory delivers.
Last updated: September 2026
What We Brought to LEAP 2026
LEAP 2026 ran from August 31 to September 3 at the Riyadh Exhibition and Convention Center (RECC) in Malham, Saudi Arabia. BBT ANTENNAS was at Booth H3.F186 with a lineup that included 5G MIMO sector and ceiling antennas, omnidirectional antennas, parabolic antennas, WiFi solutions, RFID readers and panels, and DAS products for in-building coverage.
Over four days, our engineering and sales teams connected with telecom operators, system integrators, brand owners, and procurement managers from across the Middle East and beyond. The most common question at our booth: "Can you customize antenna designs for our specific form factor and environment?"
Yes, we can. BBT operates a 30,000-square-meter factory with a dedicated RF R&D team that handles end-to-end OEM and ODM projects, from initial simulation to branded mass production. The sections below walk you through the antenna categories we manufacture, how our OEM/ODM process works, and what to expect from our quality systems.
Antenna Categories for Your Project
BBT manufactures across seven major antenna families. Each one is available for private-label OEM production, ODM design, or full custom engineering.
| Category | Typical Applications | Explore |
|---|---|---|
| BTS 5G / 6G | Base stations, macro cells, sector coverage, MIMO networks | 5G Antennas |
| DAS | In-building wireless, venue coverage, distributed antenna systems | DAS Antennas |
| WiFi 7 / WiMAX | Enterprise WiFi, high-speed broadband, outdoor hotspots | WiFi Antennas |
| RFID | Inventory tracking, asset management, electronic toll collection, warehouse logistics | RFID Antennas |
| IoT / LoRa / NB-IoT | Industrial IoT, remote connectivity, smart city sensors | Contact us |
| VHF / UHF | Land mobile radio, public safety, TETRA, marine communications | Contact us |
| Horn / Dish / Panel | Point-to-point links, microwave backhaul, RF testing | Contact us |
Working across multiple families or with a band that does not fit a single category? Send us your spec and we will confirm what fits.
OEM, ODM, and Custom Antenna Design
Not every project starts the same way. Some buyers arrive with a finished drawing; others start with a set of RF requirements; a few need a design that does not exist yet. BBT supports all three routes.
- OEM (build to print): You provide a finished antenna design or reference sample. We manufacture it at volume and apply your brand, packaging, and silkscreen. Best for brands with a proven product that need a reliable production partner.
- ODM (design and build): You provide a target specification or performance requirement. Our RF engineers design the antenna, then we manufacture and private-label it under your brand. Best for companies that want a new product without running their own RF lab.
- Custom antenna design: You bring a hard RF problem: a specific band combination, gain target, radiation pattern, form factor, or environmental constraint that off-the-shelf products cannot meet. We design, simulate, prototype, test, and produce a new antenna around your requirements.
Across all three routes, you can customize frequency bands, gain, radiation pattern, connector and cable type, form factor, mounting method, housing material, radome, color, and branding. Our custom antenna manufacturing page covers the full six-stage process from requirement review through mass production.
Your brand, design, and IP stay yours. We sign a mutual NDA before reviewing your drawings or specs, and custom designs and dedicated tooling created for your project belong to you. BBT sells under its own name as a manufacturer; we are not chasing your end customers.
Manufacturing and Quality Control
BBT has been manufacturing antennas since 1991. Here is what sits behind the products you saw at LEAP.
- 30,000-square-meter IoT Industrial Park: Our R&D and production facility in Foshan, China, has been running since 2021. It houses RF design labs, prototype workshops, testing chambers, and production lines under one roof.
- 200+ staff with dedicated R&D roles: Our engineering team covers RF, microwave, simulation design, structural engineering, trial production, commissioning, and quality control. We also run joint research programs with domestic universities.
- Four-stage quality control: Every antenna passes through raw material inspection, in-process checks, final assembly testing, and shipping verification. This system runs under ISO 9001:2015 and ISO 14001:2015 controls.
- In-house test equipment: Network analyzers, third-order intermodulation testers, thermal shock chambers, UV aging testers, rain and salt spray chambers, RoHS testing, and drop testers. We catch problems in the lab, not in your deployment.
- 60+ certifications, independent IP, and product patents: Our designs are protected, and we support project-specific certifications including CE, FCC, RoHS, and REACH on applicable models.
You can audit our facility in person or by video call before committing to a production order. See more on our manufacturing page.